removin the front bumper on a 2000 C70
-
sparkyct55
- Posts: 19
- Joined: 11 November 2009
- Year and Model: 2000 C70 conv.
- Location: Stamford, CT USA
removin the front bumper on a 2000 C70
Anybody have a diagram on the bolt locations of the front bumper? I think it would be easier to do fiberglass repairs when it is off. Thank God for this forum! My Volvo thanks you too
-
JRL
- Posts: 9350
- Joined: 22 November 2005
- Year and Model: Several
- Location: 19333
- Been thanked: 16 times
You need to drill out the rivits on each end of the bumper in the front wheel well.
After that there are two long bolts in the front of the bumper, unbolt and that's it.
Reverse the process to install..
You need to buy these rivits from Volvo and buy or borrow a rivit gun to install it
After that there are two long bolts in the front of the bumper, unbolt and that's it.
Reverse the process to install..
You need to buy these rivits from Volvo and buy or borrow a rivit gun to install it
Mod note. Jim passed away in early 2022, his contributions to this forum are immortal, and he is missed. RIP
2000 V70R Black, 144,000 miles Wife's R.
2007 V70 2.5T White/Oak 111,000 MILES. Polestar tune, IPD bars, rear spoiler, dark grey Thors, DWS 06, HU850, sub.
2000 V70R Black, 144,000 miles Wife's R.
2007 V70 2.5T White/Oak 111,000 MILES. Polestar tune, IPD bars, rear spoiler, dark grey Thors, DWS 06, HU850, sub.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 1044 Views
-
Last post by mike:
-
- 2 Replies
- 1127 Views
-
Last post by treestone27