Ive got a 98 S70 GLT with 242k miles.
This weekend I replaced the PCV system, plugs and wires.
What other "high-milage" maintenance should I be planning?
I'd like to seafoam the engine, and possibly switch to silicone vacuum lines, radiator hoses, and turbo hoses. However, I'm worried about the seafoam doing more harm than good, and the silicone possibly not being worth the investment on a car with nearl 250k miles.
I had the timing belt/water pump done approximately 60k miles ago.
As far as I know, it's still got the original turbo and exhaust.
242k miles and counting
This topic is in the MVS Volvo Repair Database »
S70 High-mileage Maintenance Checklist
- instarx
- Posts: 752
- Joined: 20 April 2008
- Year and Model: XC70 T6 2011
- Location: North Carolina
- Has thanked: 1 time
- Been thanked: 1 time
IMHO there are two ways to work on your own car - as a hobby or to keep it running well. If this car is your hobby then by all means get the silicone vacuum lines and hoses because they look cool, sort of. But they don't work any better than the normal kind.
Also IMHO (and I am sure some will disagree with me) but you couldn't pay me to put Seafoam in my engine. Maybe into the gas if I were having a problem I thought it might help with, but never into the cylinders directly. Just my opinion.
I'd put the money I would save on these things into getting the best tires I could afford next time they needed changing. OR maybe into a good quality professional detailing job with an engine steam cleaning. The detailing is purely cosmetic, but these cars really do look good when its done.
Also IMHO (and I am sure some will disagree with me) but you couldn't pay me to put Seafoam in my engine. Maybe into the gas if I were having a problem I thought it might help with, but never into the cylinders directly. Just my opinion.
I'd put the money I would save on these things into getting the best tires I could afford next time they needed changing. OR maybe into a good quality professional detailing job with an engine steam cleaning. The detailing is purely cosmetic, but these cars really do look good when its done.
2011 XC70 T6 - current
2017 Alfa Romeo Giulia Q2 - Totaled in 2022. Not my fault.
2011 XC60 - sold
2000 V70XC - given to a friend, wish I still had it.
2017 Alfa Romeo Giulia Q2 - Totaled in 2022. Not my fault.
2011 XC60 - sold
2000 V70XC - given to a friend, wish I still had it.
-
jimmy57
- Posts: 6694
- Joined: 12 November 2010
- Year and Model: 2004 V70R GT, et al
- Location: Ponder Texas
- Has thanked: 4 times
- Been thanked: 320 times
I agree with instarx. I think the silicone hoses would be overkill. I doubt you'll go another 13 years unless you decide to be the second Irv Gordon (2.6 Million miles on a 66 P1800).
I wouldn't do any internal engine cleaner either. You have 242K miles you have been doing something right. That something is you probably drive a good distance to/from work and the car doesn't see long warm-ups followed by short trips to create sludge and add unnecessary engine hours.
I do disagree with steam cleaning or pressure washing engine though. The age of that car almost assures that some of the seals in connectors and covering on wires is compromised. You may open a can of smelly worms doing anything that can force water into those items. Engine cleaner and a garden hose with sprayer is pretty safe but you'll still probably have to remove cover and blow out spark plug wells.
I would make sure the serpentine belt idler and tensioner pulleys are good as that could lead to a thrown belt into timing belt and end the long run in an instant.
Front driveshafts are worth a good check.
Maybe a power steering flush is a good idea.
I wouldn't do any internal engine cleaner either. You have 242K miles you have been doing something right. That something is you probably drive a good distance to/from work and the car doesn't see long warm-ups followed by short trips to create sludge and add unnecessary engine hours.
I do disagree with steam cleaning or pressure washing engine though. The age of that car almost assures that some of the seals in connectors and covering on wires is compromised. You may open a can of smelly worms doing anything that can force water into those items. Engine cleaner and a garden hose with sprayer is pretty safe but you'll still probably have to remove cover and blow out spark plug wells.
I would make sure the serpentine belt idler and tensioner pulleys are good as that could lead to a thrown belt into timing belt and end the long run in an instant.
Front driveshafts are worth a good check.
Maybe a power steering flush is a good idea.
-
jblackburn
- MVS Moderator
- Posts: 14043
- Joined: 8 June 2008
- Year and Model: 1998 S70 T5
- Location: Alexandria, VA
- Has thanked: 9 times
- Been thanked: 19 times
Transmission flush and/or drain and fills, depending on whether the fluid has been changed recently or not.
Silicone hoses are worthless on a car this old - I doubt I'll be keeping mine another 15 years, so I just replaced them with rubber ones again.
Silicone hoses are worthless on a car this old - I doubt I'll be keeping mine another 15 years, so I just replaced them with rubber ones again.
'98 S70 T5
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
-
jblackburn
- MVS Moderator
- Posts: 14043
- Joined: 8 June 2008
- Year and Model: 1998 S70 T5
- Location: Alexandria, VA
- Has thanked: 9 times
- Been thanked: 19 times
You probably need to replace O-rings on the oil pickup tube.
'98 S70 T5
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
-
Glencoeteen
- Posts: 208
- Joined: 31 December 2009
- Year and Model: 00 V70R
- Location: Portland, Oregon
how smooth does the motor sound? My 98T5 is just shy of 211k
and it runs like a motor with 50k it does need the PCV done, I did seafoam treatment through the vacuum tree in small amounts let it sit for 15 mins and then ran it and it smoked like crazy, but my results are idled smoother and boy did it get better gas millage.
+1 on the drain and fill, my transmission is the original and works just like it did when new, every other oil change it gets 4qts drained and then refilled, cost is the same as an oil change and the reward is 211k on one transmission and looks like it will go another 211k. and this is in Miles
+1 on the drain and fill, my transmission is the original and works just like it did when new, every other oil change it gets 4qts drained and then refilled, cost is the same as an oil change and the reward is 211k on one transmission and looks like it will go another 211k. and this is in Miles
98 V70XC~ Sold
98 S70 T5 ~ Stolen ;(
08 Xc90 V8 ~ Totaled
98 Expedition EB weekend warrior
98 S70 T5~ New project!
98 S70 T5 ~ Stolen ;(
08 Xc90 V8 ~ Totaled
98 Expedition EB weekend warrior
98 S70 T5~ New project!
-
- Similar Topics
- Replies
- Views
- Last post






