ram intake

bmxandy89 · Post by **bmxandy89** » 03 Apr 2011, 20:36

workin on a ram intake for my n/a 850 its a 94 and iv seen the walk through on how to do it on the turbo but the MAF is diff. on mine its like part of the box its self what can i do to make this work the 3 inch tubing is not big enough for the MAF also is there any way to make this adapter myself im using 3 inch plastic tubing so i could cut a hole in the tubing and slide the sensor in but it wont be fully in the tube

Post by **kcodyjr** » 03 Apr 2011, 20:42

RAM intake is only going to help you at high speeds, is likely to suck up water in the rain, and will eat away at your low end torque. It'll feel like your get-up-n-go, got up and left.

These engines have a tuned-length cold air intake from the factory. It's not easy to do better.

If you really must have more oomph from your NA, try:

0, standard tune-up items.

1, K&N panel air filter in the factory box.

2, look for an intake manifold from a 10V version, with split channels, a flapper, and a solenoid. You'll need to wire a control to the interior; I've never heard of how to get the ECU to use it automatically.

bmxandy89 · Post by **bmxandy89** » 03 Apr 2011, 20:59

i know it wont give me any hp it also wont loose any by any means as long as u do it right as long as its boxed of and has the factory cold airintake hose going to it but im planing on making my own cold intake as well just threw the bottom of the grille with a chrome induction funnel just for sh<tz and giggles i like the look and sound of the cone filter and if i can get colder air to go into the box i make in theory it should help with something but im not expecting hp gains or gas mileage