Sway bar bushings 850/S70

elchopperfreak · Post by **elchopperfreak** » 07 Sep 2011, 22:03

Thats what Im talking about, do you have a part number?
Gracias

valvster · Post by **valvster** » 08 Sep 2011, 07:12

My understanding is that the early 850's you could change the bushings but later models the bushing is vulcanised to the bar so any wear is likely to be on the outer perimeter of the bushing around the clamp.
If that is the case then it may be easier to fabricate and fit shims around the bush to make everything tight again.
I reckon the bush is vulcanised to the bar to stop any sideways movement, something to consider if replacing with slide on poly bushes.

Valvster

Post by **Juan62** » 10 Sep 2011, 04:57

I bought my sway bar bushings from partsonline.com This is UK and will ship to USA and its territories.

swede_speed · Post by **swede_speed** » 10 Sep 2011, 10:05

http://www.volvolution.com/forum/viewto ... f=86&t=838

found this one day while researching the same thing you are.......

http://www.volvolution.com/forum/viewto ... f=86&t=838

hey? why not?
-_Andy

swede_speed · Post by **swede_speed** » 10 Sep 2011, 10:31

http://www.polytek.com/cart/

caz2773 · Post by **caz2773** » 10 Sep 2011, 11:33

si me recuerdo bien its 9.5157 but i could be wrong goto their website and it should tell you either 9.5157 or 5156 but it is for 20mm bar

swede_speed · Post by **swede_speed** » 12 Sep 2011, 17:18

https://www.matthewsvolvosite.com/forums ... =1&t=29384

elchopperfreak · Post by **elchopperfreak** » 12 Sep 2011, 20:20

Andy, those links rock!
Very interesting indeed..
Thanks man!!

Sway bar bushings 850/S70

Re: Sway bar bushings 850/S70