2006 xc90 door latch part

whaleplane · Post by **whaleplane** » 18 Oct 2011, 16:46

Hey guys,

My wifes' front passenger door stopped opening from the inside. It's getting a little old rolling down the window and using the outside door handle so I popped off the door panel to take a look. The part that is broken is not the handle but bracket that connects with the torx screws. I've looked on a few websites and they either don't have a picture of the part or if it does it looks like a sketch one of my kids drew.

Does anybody know the part number I'm talking about? My mother in law is coming in town soon and I need to get this fixed so I don't hear about it....

Thanks.

Post by **gshadow325** » 19 Oct 2011, 20:36

when you took it off did it look like the part that attaches the cable to the pull handle broke or is not clipped on right?

tkae some pictures and show us. i might be able to walk you thru on how i fixed my driver door the other day with two simple screws LOL

calebcannon · Post by **calebcannon** » 19 Oct 2011, 22:50

I am having a problem with the passenger side door lock. The actuator moves (makes a grinding noise) when I pull the lock knob on the door or hit the remote button. However, the lock does not move up or down. I pulled the door panel but could not see any problems. Is it difficult to remove the bracket and actuator? It looks like a tight squeeze getting that baby out! Thanks.

whaleplane · Post by **whaleplane** » 21 Oct 2011, 13:07

When you look at it you can see where the plastic has broken off. If there is a way to repair the plastic with screws I'm all for it.

I will upload a few picutures when the car comes home.

Post by **gshadow325** » 21 Oct 2011, 13:17

two screws is all it took to repair my door pull handle