Login Register

whining noise 2000 xc70

Help, Advice and DIY Tutorials on Volvo's P80 platform cars -- Volvo's 1990s "bread and butter" cars -- powered by the ubiquitous and durable Volvo inline 5-cylinder engine.

1992 - 1997 850, including 850 R, 850 T-5R, 850 T-5, 850 GLT
1997 - 2000 S70, S70 AWD
1997 - 2000 V70, V70 AWD
1997 - 2000 V70-XC
1997 - 2004 C70

Post Reply
jonib123
Posts: 9
Joined: 3 January 2012
Year and Model: 99 s70,98 s70, 00 xc
Location: Portland, OR

whining noise 2000 xc70

Post by jonib123 »

hi

i have a 2000 xc70 with 145k the whining noise is coming from what seems to be the angle gear but im not sure i removed the rear drive shaft and still it sound like something is spinning agenst something i dont know whinning would be the best way to put it i need help please just point me in the right direction just some ideas i really dont want to replace the angle gear but if it will solve my problem i will thank you



VOLVO 4 LIFE

jonib123
Posts: 9
Joined: 3 January 2012
Year and Model: 99 s70,98 s70, 00 xc
Location: Portland, OR

Post by jonib123 »

you know once under the car it almost seems like a axle or wheel bearing the faster i go the louder it get and the driver side cv is lose i mean there is alot of play in it i can almost move it a half inch tword the tranny and back twords the nuckle any ideas?

Pauloil
Posts: 1038
Joined: 21 March 2006
Year and Model:
Location: davenport, IA

Post by Pauloil »

after a drive is one hub hotter? do you hear a clunk when turning one way or the other?
99 V70XC 158K

95 850glt 188K

sorenmail
Posts: 9
Joined: 9 June 2009
Year and Model: 2000 V70XC
Location: Orange County, CA

Post by sorenmail »

I have the same vehicle and rebuilt the angle gear at 96000 miles. Problem was diagnosed by putting car on a lift with engine running and in drive. Used a mechanics stethoscope and touched wheel bearings, cV driveshafts, trani housing and angle gear housing. It was very apparent the bearings were bad in the angle gear. Sounded like a coffee grinder. Had this done after the dealer's diagnosis of replacing CV driveshafts, trani and angle gear @ $7500. Rebuild cost me $800 and I had to do some legwork to get the correct bearings.

jonib123
Posts: 9
Joined: 3 January 2012
Year and Model: 99 s70,98 s70, 00 xc
Location: Portland, OR

Post by jonib123 »

thank for the info it was the spline shaft now it work perfect i was sweeting man 2000 are the most expensive angle gears to replace thank goodness hope this will help someone else volvo 4 LIFE

Post Reply
  • Similar Topics
    Replies
    Views
    Last post