Login Register

V70 resonant vibration

Help, Advice and DIY Tutorials on Volvo's P80 platform cars -- Volvo's 1990s "bread and butter" cars -- powered by the ubiquitous and durable Volvo inline 5-cylinder engine.

1992 - 1997 850, including 850 R, 850 T-5R, 850 T-5, 850 GLT
1997 - 2000 S70, S70 AWD
1997 - 2000 V70, V70 AWD
1997 - 2000 V70-XC
1997 - 2004 C70

Post Reply
tomg
Posts: 3
Joined: 16 October 2003
Year and Model:
Location: UK

V70 resonant vibration

Post by tomg »

I have driven my 2000 manual 140hp 2.4 'new' V70 since it was new. It has the B5244S2 engine. A few months ago an annoying resonant vibration became noticeable. It occurs when accelerating under load through the 1900 - 2100 rpm band. It sounds like engine vibration causing something to resonate at its natural frequency. Having found no obvious sources of the noise when the engine is revved in neutral, I gave the V70 to my local Volvo dealer who adjusted the catalyser heat shield which gave just a little improvement. I gave the V70 back to the Volvo dealer, having done a road test with their senior technician who confirmed the noise. He suspected the catalytic converter. However, he changed the flexible section of the exhaust down pipe which made no difference apart from the dropping resonance rev band from 2000 - 2200 to the current 1900 - 2100. The Volvo dealer gave up at this point and told me to live with what is probably induction noise. I don't accept this story as the noise was not noticeable from new until a few months ago and it does not feel like induction noise. I found a few references to V70 noises/vibration in other web sites, including a reference to resonance in the exhaust system. Before I go the expense of changing the exhaust system, does anyone have similar experience or advice ?
Tom Gordon

User avatar
matthew1
Site Admin
Posts: 14484
Joined: 14 September 2002
Year and Model: 850 T5, 1997
Location: Denver, Colorado, US
Has thanked: 2660 times
Been thanked: 1248 times
Contact:

Post by matthew1 »

Are your engine mounts worn?
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.

Also -> Amazon link
. Click that when you go to buy something on Amazon and MVS gets a cut!

1998 V70, no dash lights on

1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace

2004 V70 R [gone]

How to Thank someone for their post

Image

tomg
Posts: 3
Joined: 16 October 2003
Year and Model:
Location: UK

Post by tomg »

There is no obvious sign of wear in the engine mounts. The V70 has clocked only 30,000 miles and most of this mileage is gentle driving on motorways (highways).
Tom Gordon

User avatar
Tsquared
Posts: 519
Joined: 17 August 2003
Year and Model: 11 C30
Location: Atlanta GA
Has thanked: 1 time

Post by Tsquared »

To check to see if your mounts are worn when they appear to be ok, you need someone behind the wheel while it is in park. Raise the hood and have your friend gun the engine a few times. If the mounts are worn the engine will tourque and rock inside the compartment - it will be fairly obvious which mount is shot. If the engine moves very little you are ok - you might see what else is causing the vibration when the revs are up...

Good Luck
'11 C30 T5

'96 854 - died an early death with 184K miles. Killed by the front end of an LTD on a suicide mission (T-boned and both cars totaled).

tomg
Posts: 3
Joined: 16 October 2003
Year and Model:
Location: UK

Post by tomg »

Matthew, Tsquared, thanks for your advice.

BTW, a contributor to the UK Volvo Owners' Club web site with the same problem suggested changing the spark plugs, because that worked for him. Unfortunately it did work for me.
Tom Gordon

Ian Stone

Post by Ian Stone »

Got exactly the same problem. Mine is an automatic so all the engine load work is done around 2000 rpm. It was like it when I bought is second hand at 46000 miles.
I improved the situation by stopping the heat shield hitting the body but is was still there. I have noticed a rattle from the exhaust as it there was something in there. I am going to attack the problem in the warmer weather. I have also noticed the air filter assembly is not that sound so will strip this down in the better weather. My first guess was the inlet ducting.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post