Oil Pressure Gauge and wideband A/F

[tjts1]

From what I remember (its been 2 years since I built it) it had room for all the inputs on the PCB to solder in plugs for the various inputs. I left most of those blank since I'm only using it for AFR. It also had room for a map sensor so you could run a vac hose to the manifold. Theres a lot of documentation on the site that should explain everything in detail and also a good support forum. The vendor is out of Canada. I bought 2 controllers from 14point7 (first one was an older gen, looked completely different) installed on 2 cars with 50k miles between them. Totally reliable.
good luck