Login Register

2000 V70 Tailgate Won't Unlock

Help, Advice and DIY Tutorials on Volvo's P80 platform cars -- Volvo's 1990s "bread and butter" cars -- powered by the ubiquitous and durable Volvo inline 5-cylinder engine.

1992 - 1997 850, including 850 R, 850 T-5R, 850 T-5, 850 GLT
1997 - 2000 S70, S70 AWD
1997 - 2000 V70, V70 AWD
1997 - 2000 V70-XC
1997 - 2004 C70

Post Reply
User avatar
erikv11
Posts: 11800
Joined: 25 July 2009
Year and Model: 850, V70, S60R, XC70
Location: Iowa
Has thanked: 292 times
Been thanked: 765 times

Re: 2000 V70 Tailgate Won't Unlock

Post by erikv11 »

I was just out removing the rear panel of my 850 wagon. As I got started by popping off the trim around the inside latch handle I realized, "Oops, the trim was never mentioned in that thread the other day ..."

The first thing to come off is the trim around the inside handle/lever. I always use a putty knife, the best tips I have seen for the trim are http://volvospeed.com/volvo_repairs_how ... epair.html and there is a video from IPD on youtube etc.
'95 854 T-5R, Motronic 4.4, 185k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 197k
'07 XC70, black, 205k
'07 XC70, willow green, 212k
'99 Camry V6 :shock: 153k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k

KBlue_V70
Posts: 35
Joined: 4 July 2014
Year and Model: 2000 V70 XC AWD SE
Location: Colusa, CA

Post by KBlue_V70 »

Thank you! A mechanic is going to fix it for me tomorrow. I believe he got two at the junkyard--one for a spare since I use the tailgate a lot. I get to watch. :)

KBlue_V70
Posts: 35
Joined: 4 July 2014
Year and Model: 2000 V70 XC AWD SE
Location: Colusa, CA

Post by KBlue_V70 »

The tailgate latch was replaced today and works perfectly. :D The tips for getting the interior panel off were helpful. Thanks so much.
The only real curiosity was that the mechanic couldn't see what caused the malfunction with the original broken one so we decided to keep it for "research" purposes.

OldSkoolMadSkilz
Posts: 22
Joined: 23 December 2011
Year and Model: v70XC 1998
Location: MD US
Been thanked: 1 time

Post by OldSkoolMadSkilz »

Here's how to open the latch when the return spring breaks. Disassembling the panel will not help as you will just be pushing on the same mechanism that the handle uses. The latch is actually releasing, but there is too much pressure from the gasket to allow it to slide.

So here's how it is done:

1- Put your palm on the lower lip of the tail gate at the left edge of the license plate.
2- Push as hard as you can while squeezing the latch and immediately pull up.

Doesn't always work, but after a few tries, you'll get it.

I'm going to try welding a small screw eye to my latch and see if that will work as a spring retainer.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post