2006 xc90 passenger tail light not working

[robeau2]

Hi all,
I got the message Bulb failure position light and found the tail light was burnt. When tried to change the bulb i found that the connectors were all corodded when tried to cl;ean they broke. Anyhow, I changed the hole wiring and put new bulbs on all. But the tail lignt is still not working and I still have the message on the dash board also discovered that the license plate light is not working.

Thanks for your help
Ron

[Vovo_merz]

Check all your fuses first if all are good check again if still good then go back to the wiring maybes something was missed.
good luck