99 xc70 intake pipe sensors

mcq · Post by **mcq** » 31 Oct 2015, 19:46

: sensors In the intake pipe; intake.jpg (152.71 KiB) Viewed 1561 times

I removed the starter and replaced. In the photo, the left sensor was loose and literally fell out of the hose when I started to unplug it. I believe it is air intake temp. I put an ohm meter on it and no conductivity. is there a correct test for this.? This is directly under the intake manifold before throttle body. thanks

Bluevanacd2005 · Post by **Bluevanacd2005** » 01 Nov 2015, 19:12

That is intake air temp. Probably digital due to having three wires.. I'd bet it sends out a 5v signal dependant on temp.

The clips break and they fall out.. I siliconed mine in.

Spenser

Post by **scot850** » 01 Nov 2015, 23:17

Or zip tie it on.

Neil.