Radio wiring/colours MY99

Kitebuggy · Post by **Kitebuggy** » 14 Jan 2016, 11:12

Hi,

the factory connectors are missing at my V70 (MY99). The previous owner cut them off

To connect my new radio i need the wring diagramm, in particular the colours of the cables to get the right ones...

Could anyone help?

Thanks in advance

K.

Post by **abscate** » 14 Jan 2016, 13:22

I could take some pictures of my North America model year 1999, built late 1998 calendar yearif that will help.

Kitebuggy · Post by **Kitebuggy** » 14 Jan 2016, 14:01

Thanks. This may help. I need the function of each cable, like "yellow/violett = ACC" or "brown/black = left rear -"
If i know, what cable is linked to pin x or y at the connector - i can figure out the right layout for my project.

Post by **BEJinFbk** » 14 Jan 2016, 20:08

Assuming you haven't got an OEM external amp,
this should do it. ( FYI - "SB" in this diagram is Black ).

98 V70 Radio - No External Amp.pdf: (469.76 KiB) Downloaded 178 times

Kitebuggy · Post by **Kitebuggy** » 16 Jan 2016, 15:24

Thanks!
It works, so far.
What about the speakers in the dashboard? My radio have only 4 speakers support. I don't know how to connect the additonal dashboard speakers. The tweeters in the back are linked to the back door speakers. Why this doesn't work for the front?
Do i need additonal frequency separators?

Thx
K.

Post by **BEJinFbk** » 16 Jan 2016, 15:42

Connect them in parallel with the fronts.
That's what the aftermarket wiring harness
adapter does. You should be just fine.