2001 v70 XC master window switch pack doesn't work after disconnect/ reconnect

[jthm77]

I had to pull my driver door panel for an insert repair ( the glue had let go from the main and insert panel) , apron reconnecting the window switches I get no power to the panel at all for Windows ,mirrors or locks. I tested the power coming to the harness and have 12v to the pink and red/wht with black as ground. What could I possibly have done during a simple door panel removal to kill this entire switch

[jthm77]

Just realized my key fob no longer locks the car either I assume the sensor unit is built into the window switch pack

[TrstnBrtt]

Are both harness' in? I know I've made that mistake before lol

[jthm77]

Yes , checked them a few times and wiggled them while trying the switches

[jthm77]

Does anyone know which wires feed the drivers window up so I can at least close my window.... Summer in PHOENIX is no time to be rolling with the window down

[abscate]

Search for the master P2 reset sequence. Try locking. Unlocking 5x with the key in the driver door

Thread here

http://www.matthewsvolvosite.com/forums ... 52#p186052

[jthm77]

Ok so I feel like a complete tool box here , so I finally realized my climate control was also dead ,so I pulled it back out and some how I had forgotten to plug it back in so in summation I'm a dumb ass and the power to the driver door master switch pack some how runs through the same harness as the climate control.

Thanks for the help

[abscate]

Thats never been done before .....today