V70 AWD Transmission torque mount

m96ag · Post by **m96ag** » 22 Aug 2016, 05:55

The transmission torque mount is worn on my car and I went looking for a replacement. It seems that Volvo discontinued the required part number 9470836. My only other option appears to be proparts which I would like to avoid. Any ideas?

Sommerfeldt · Post by **Sommerfeldt** » 22 Aug 2016, 06:31

Volvo part # 30680750 should fit. Seems like it's pretty readily available, too.

- S

m96ag · Post by **m96ag** » 22 Aug 2016, 06:34

Sommerfeldt wrote:Volvo part # 30680750 should fit. Seems like it's pretty readily available, too.

- S

So any poly bushing would for that would fit? IPD has this https://www.ipdusa.com/products/9216/12 ... rque-mount but with he following note:

Application note: This product fits most FWD & AWD P80 & P2 based five cylinder models but does not fit AWD models prior to 2001.

zhenya · Post by **zhenya** » 22 Aug 2016, 07:06

In for an answer as I've been wondering the same thing. I have been told when asked elsewhere that you can get the non-awd mount and make a frankenmount with your existing parts but haven't taken the steps necessary to verify how this would be done.

Sommerfeldt · Post by **Sommerfeldt** » 22 Aug 2016, 07:37

Hm.... I saw 30680750 listed as if it would fot a 2000. But now I'm all confused.
http://www.skandix.de/en/spare-parts/en ... 6f68c876ae will definitely fit, though. Listed as alternative to 9470836.

- S

Post by **tryingbe** » 22 Aug 2016, 07:48

Maybe this will work
https://www.fcpeuro.com/products?keywords=30680750

Post by **scot850** » 22 Aug 2016, 15:29

I also have the concern about the lack of availability of this part for AWD P80 vehicles.

I recall a response when I had a thread on this subject from a member who had modified a P2 lower torque mounting by modifying the bolt hole positions by elongating them, and this was successful.

I have been trying to contact a couple of parts suppliers in Sweden who claim to sell poly-bush inserts for the lower torque bracket, but I have not received any replies. I wanted to confirm if the sold both sizes of bush, or just the front/larger bushes. My experience has been the smaller rear ones are the ones that typically fail.

Has anyone tried Frankensteining the rear mounting from a AWD version to a FWD version? Anyone know what the actual differences are?

Powerflex in USA have what appears to be the small and large bushings at a price!

http://powerflexusa.com/850s70v70upto2000.aspx

There is a lot of chatter and good info on this thread also:

http://www.volvoxc.com/forums/showthrea ... 525edd17d0

Swedish links are:

https://www.skruvat.se/Undre-motormonte ... 18743.aspx

and

http://vparts.se/se/polyuretan-motorfas ... -xc90.html

Hope this is of some help!

Neil.

Sommerfeldt · Post by **Sommerfeldt** » 22 Aug 2016, 16:23

I don't get it... the vparts mount lists just about every Volvo there is - is there really a difference between them, or are we victims of Volvo shenanigans with part numbers?

- S

m96ag · Post by **m96ag** » 22 Aug 2016, 16:25

Sommerfeldt wrote:I don't get it... the vparts mount lists just about every Volvo there is - is there really a difference between them, or are we victims of Volvo shenanigans with part numbers?

- S

I contacted IPD and they said that they're poly bushing will NOT fit the AWD models.

Post by **scot850** » 22 Aug 2016, 16:34

I have sent e-mails again to the 2 Swedish companies to see if I can get an answer from them.

Neil.