P80 P2 Electrical connectors tip

Post by **abscate** » 26 Feb 2018, 14:17

Well, Ive been mechanicing for 50 years now.

Electrical connectors on Volvos and other cars have been giving me nightmares, trying to figure out how to use my hands to release the clip and separate them...

.....until today.

Simple tip. PUSH the connector more firmly closed while applying pressure to the release tab,when tab pops, then pull apart.

Its really that simple.

Post by **oragex** » 26 Feb 2018, 14:22

Will try next time, thsese were designed by some swedish survivalist.

Post by **abscate** » 26 Feb 2018, 14:23

oragex wrote: 26 Feb 2018, 14:22 Will try next time, thsese were designed by some swedish survivalist.

Ive busted more swear word dictionaries trying to undo these than I care to confess..

Post by **scot850** » 26 Feb 2018, 16:19

More often as they angle them or position them so you can't quite get 2 hands onto them firmly to disconnect. Also there has to be a mandatory sharp pointy metal bracket or other that is guaranteed to remove skin.

Neil.

Post by **theWIFES_S70** » 26 Feb 2018, 16:29

abscate wrote: 26 Feb 2018, 14:23
oragex wrote: 26 Feb 2018, 14:22 Will try next time, thsese were designed by some swedish survivalist.
Ive busted more swear word dictionaries trying to undo these than I care to confess..

Me too!

What I do now is wait until my brother comes around. I let him disconnect my electrical connectors... He seems to have the patience to not overthink them!

At least they aren't as bad as Saab electrical connectors...

Post by **RickHaleParker** » 26 Feb 2018, 17:10

For stubborn connectors, use a toothpicks as a wedges to hold the tabs as you pull the connector apart.
You can also lift the tab and slide a small piece of thin and ridge plastic film under it. The film will keep it from relatching.

Post by **mrbrian200** » 26 Feb 2018, 17:30

I'd might be interested in meeting a Swedish survivalist. Here they're all infinitely paranoid conspiracy theorist goth meets hillbilly sort of thing.