Ignition Coils Topic is solved

PoppySheaf · Post by **PoppySheaf** » 31 Jan 2019, 06:08

2008 xc90 3.6L 6

Any recommendations for decent yet affordable ignition coils?

Post by **cn90** » 31 Jan 2019, 20:14

Try ebay for used coils...

wanderdüne · Post by **wanderdüne** » 31 Jan 2019, 21:04

You could call Erie VoVo and see if they can help you out on used http://erievovo.com/. Not sure if they sell coils though.
Bremi coils at a reasonable price: https://www.rmeuropean.com/Products/306 ... V4246.aspx. I've ordered through them on several occasions. They are legit and dependable and ship free and fast over $65

PoppySheaf · Post by **PoppySheaf** » 31 Jan 2019, 21:10

Thanks

Post by **oragex** » 01 Feb 2019, 05:43

Usually no need to replace the all. Only use Bosch - see Fcpeuro or Ipdusa for new ones or Ebay for used ones as mentioned. If you go used ones see this www.youtube.com/watch?v=uHLgXQo6E9c

But even more important, find out why the coil failed. Usually it's a thermostat problem on the 3.2, it cracks inside as the plastic tabs and the engine runs hotter - gauge still at 12h only the top of the engine stays hotter which will affect the coils

Also, inspect the spark plugs - too worn and it will stress the ignition coils

PoppySheaf · Post by **PoppySheaf** » 01 Feb 2019, 06:15

Thanks