IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

Anybody running NON-Volvo CV joints on their driveshaft? Topic is solved

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

User avatar
- Pete -
Posts: 226
Joined: Fri Dec 06, 2013 10:13 pm
Year and Model: 01, 04, 04, 04 V70's
Location: Minnesota/Wisconsin
Has thanked: 23 times
Been thanked: 36 times
United States of America
- Pete -

Anybody running NON-Volvo CV joints on their driveshaft?

Post by - Pete - » Sat Jul 20, 2019 12:30 am

Obviously pertinent to AWD P2's only

There's really not a whole lot of reviews out there for the aftermarket CV joints.

That front one (bellows type seal, in particular) just takes a beating right there by the cat.
My front & rear joints feel fine, just that front bellows seal is all sorts of messed up. Can't get just the seal & the kits from Volvo/FCP are pretty cost prohibitive.

I'm tempted to just get the aftermarket cheaper stuff & just use the seal out of it & keep my original CV joint.

Anyhow, just thought I'd ask before I commit one way or the other. Not looking good for Volvo genuine parts sales on this one so far!


2001 V70XC 142k
2004 V70 AWD 134k
2004 V70R M66 142k
2004 XC70 278k
2006 XC70 155k Sold

User avatar
abscate
MVS Moderator
Posts: 18901
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 222 times
Been thanked: 735 times
Trinidad & Tobago
abscate

Re: Anybody running NON-Volvo CV joints on their driveshaft?

Post by abscate » Sat Jul 20, 2019 5:02 am

How about Erie for a used one?


Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 BMW
Link to Maintenance record thread

jimmy57
Posts: 6417
Joined: Fri Nov 12, 2010 9:25 am
Year and Model: 2004 V70R GT, et al
Location: Ponder Texas
Has thanked: 2 times
Been thanked: 186 times
jimmy57

Re: Anybody running NON-Volvo CV joints on their driveshaft?

Post by jimmy57 » Sat Jul 20, 2019 8:38 am

I put a driveshaftparts.com front CVJ on the 2004 V70R I had and it has now run 95K miles with it. I sold the car but I still service it.



cn90
Posts: 6537
Joined: Wed Mar 31, 2010 9:54 am
Year and Model: 2004 V70 2.5T
Location: Omaha NE
Has thanked: 0
Been thanked: 100 times
United States of America
cn90

Re: Anybody running NON-Volvo CV joints on their driveshaft?

Post by cn90 » Sat Jul 20, 2019 8:57 am

- Aftermarket (mostly Chinese) CV joint is hit-or-miss...

- The best approach is visit a local junk yard. Over the years, I find that most axles at junk yards are in fact Volvo OEM with intact boots.
Those are the axles that you want.
Buy them for cheap (around $25-$30/each).

- Then order GKN boots from places like FCPEuro for cheap ($10-$15/each).

- Reboot both inner and outer and now you have a "brand-new" OEM axle for about $40-$45 when all the costs are taken into account.

- You basically "have to work to get what you want"...LOL.


2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+

User avatar
- Pete -
Posts: 226
Joined: Fri Dec 06, 2013 10:13 pm
Year and Model: 01, 04, 04, 04 V70's
Location: Minnesota/Wisconsin
Has thanked: 23 times
Been thanked: 36 times
United States of America
- Pete -

Re: Anybody running NON-Volvo CV joints on their driveshaft?

Post by - Pete - » Sat Jul 20, 2019 9:54 am

CN90, haha, I've discovered your helpful tidbit on my own for the half shafts as well.

I'm talking about the driveshaft CV joints, not the half shaft CV joints. And actually, my CV joints are fine, I just need the bellows shaped rubber seal that keeps the grease in the front joint capsule. Thus I'm rather unwilling to shell out $329-400 for an entire Genuine Volvo joint kit. The front CV joint is literally ~2" away from the catalytic converter.

For now, to sorta curtail the grease's escape path I ziptied one of those pink heavy duty shop rags around the necked down front portion of the shaft. Hopefully it doesn't catch on fire!

I see Colorado Driveshaft has a listing on eBay for a CV joint kit. I think they are about the only company still rebuilding Volvo driveshafts & from memory seem to have rave reviews from fellow Volvo owners. I sent them an email to inquire the country of manufacture & quality comparison to OEM.


I'll check out your link Jimmy, thanks.


2001 V70XC 142k
2004 V70 AWD 134k
2004 V70R M66 142k
2004 XC70 278k
2006 XC70 155k Sold

XC70Rider
Posts: 396
Joined: Thu Oct 18, 2018 7:09 pm
Year and Model: 2007 XC70
Location: MA
Has thanked: 20 times
Been thanked: 17 times
United States of America
XC70Rider

Re: Anybody running NON-Volvo CV joints on their driveshaft?  Topic is solved

Post by XC70Rider » Sat Jul 20, 2019 10:11 am

The CV joints provided by Colorado Driveshafts are made in Turkey. The rubber boot is thicker than the OEM boots I removed. They cost $75 each.

I installed them on my driveshaft last May and have been holding fine for the last 3k miles

viewtopic.php?f=9&t=80803&p=506806&hili ... do#p506806

EDIT:

Order directly from them and you'll get a lifetime warranty. Give Dave a call next Monday. After the purchase you'll get an email purchase confirmation with the USPS priority tracking #

http://coloradodriveshaft.com/
Last edited by XC70Rider on Sat Jul 20, 2019 10:19 am, edited 2 times in total.
These users thanked the author XC70Rider for the post:
- Pete -



cn90
Posts: 6537
Joined: Wed Mar 31, 2010 9:54 am
Year and Model: 2004 V70 2.5T
Location: Omaha NE
Has thanked: 0
Been thanked: 100 times
United States of America
cn90

Re: Anybody running NON-Volvo CV joints on their driveshaft?

Post by cn90 » Sat Jul 20, 2019 10:11 am

Ooops,

Sorry, this is driveshaft Front CV Joint...

I just searched ebay and coloradodriveshaft has an aftermarket CV joint listed for $75 ("European Aftermarket" per listing):

https://www.ebay.com/itm/Volvo-drive-sh ... 8124!US!-1


2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+

User avatar
- Pete -
Posts: 226
Joined: Fri Dec 06, 2013 10:13 pm
Year and Model: 01, 04, 04, 04 V70's
Location: Minnesota/Wisconsin
Has thanked: 23 times
Been thanked: 36 times
United States of America
- Pete -

Re: Anybody running NON-Volvo CV joints on their driveshaft?

Post by - Pete - » Sat Jul 20, 2019 10:27 am

Yep, that's the same one I found yesterday. I emailed them about it so I'll let ya know what their response contains.


2001 V70XC 142k
2004 V70 AWD 134k
2004 V70R M66 142k
2004 XC70 278k
2006 XC70 155k Sold

User avatar
- Pete -
Posts: 226
Joined: Fri Dec 06, 2013 10:13 pm
Year and Model: 01, 04, 04, 04 V70's
Location: Minnesota/Wisconsin
Has thanked: 23 times
Been thanked: 36 times
United States of America
- Pete -

Re: Anybody running NON-Volvo CV joints on their driveshaft?

Post by - Pete - » Sat Jul 20, 2019 10:29 am

XC70Rider wrote:
Sat Jul 20, 2019 10:11 am
The CV joints provided by Colorado Driveshafts are made in Turkey. The rubber boot is thicker than the OEM boots I removed. They cost $75 each.

I installed them on my driveshaft last May and have been holding fine for the last 3k miles

viewtopic.php?f=9&t=80803&p=506806&hili ... do#p506806

EDIT:

Order directly from them and you'll get a lifetime warranty. Give Dave a call next Monday. After the purchase you'll get an email purchase confirmation with the USPS priority tracking #

http://coloradodriveshaft.com/
Awesome! Thanks John. That's that route I'll most likely go then.


2001 V70XC 142k
2004 V70 AWD 134k
2004 V70R M66 142k
2004 XC70 278k
2006 XC70 155k Sold

XC70Rider
Posts: 396
Joined: Thu Oct 18, 2018 7:09 pm
Year and Model: 2007 XC70
Location: MA
Has thanked: 20 times
Been thanked: 17 times
United States of America
XC70Rider

Re: Anybody running NON-Volvo CV joints on their driveshaft?

Post by XC70Rider » Sat Jul 20, 2019 10:33 am

- Pete - wrote:
Sat Jul 20, 2019 10:29 am
XC70Rider wrote:
Sat Jul 20, 2019 10:11 am
The CV joints provided by Colorado Driveshafts are made in Turkey. The rubber boot is thicker than the OEM boots I removed. They cost $75 each.

I installed them on my driveshaft last May and have been holding fine for the last 3k miles

viewtopic.php?f=9&t=80803&p=506806&hili ... do#p506806

EDIT:

Order directly from them and you'll get a lifetime warranty. Give Dave a call next Monday. After the purchase you'll get an email purchase confirmation with the USPS priority tracking #

http://coloradodriveshaft.com/
Awesome! Thanks John. That's that route I'll most likely go then.
Before calling them on Monday email them your VIN. They required that from me to directly match the CV joints.



Post Reply