Setting doors to lock automatically

Yaworski · Post by **Yaworski** » 27 Nov 2019, 12:47

I have Vida and VDash as well as a Dice unit. I also have a 2002 S60.

Can I use the magic software to set my door locks to lock automatically when I put the car in drive or start moving?

Thanks.

Post by **yagger** » 28 Nov 2019, 12:14

No. For your car Vdash can not do it. Need to extract software first from your CEM. We can do it remotely, but there are couple small details.

a3inverter · Post by **a3inverter** » 30 Nov 2019, 06:20

I’ll sign up for this one as well! Can you expand on the “small details”?

Yaworski · Post by **Yaworski** » 30 Nov 2019, 10:25

If Vdash can't do it, can Vida?

Also what are the "small details"? Also, what is the charge to do this remotely?

Post by **yagger** » 30 Nov 2019, 14:34

“small details”

not easy to explain about it first time here, easier by voice.

Post by **RickHaleParker** » 30 Nov 2019, 17:52

yagger wrote: 30 Nov 2019, 14:34 not easy to explain about it first time here, easier by voice.

Can you extract the Motorola MC68386 or Renesas M32C binary without opening the CEM?

I been looking high and low for a cost effective way to extract a Renesas M32C bin and get the pin code. Found the software to extract the pin from the bin but no economical way to extract the bin from the M32C.

Post by **yagger** » 30 Nov 2019, 19:34

Yes, we can extract the Renesas M32C binary without opening the CEM (through OBD connector), and also we can extract the Motorola MC68386 binary with opening the CEM (through OBD connector with additional small manipulation), but without some soldering works.
Also, we can extract soft from P1 and P3 platforms CEM through OBD connector.