Hi All
I have a Volvo S60 and have just replaced the cylinder head due to cambelt failure.. The problem Im having is I have the "Engine Service Required" when I try to reset with trip buttton it gives the codes 097 & 021.. Ive done some reading up and this usualy means oil level.. I've checked the oil level and this is sitting at 72% on vida or 1 bar off full on dash.. Im at a loss with this .. Also the car seems to be in limp mode as there is no acceleration.. when I reset using vida the car is fine no codes and accelerates away no problem.. but after a couple of miles it re-appeares along with the limp mode..
Any suggestions why this is happening..
codes 097 & 021
-
regent
- Posts: 1319
- Joined: 22 February 2010
- Year and Model: 2015 XC60 T5
- Location: Under the Hood
- Has thanked: 2 times
- Been thanked: 12 times
When you connect VIDA and go to Diagnostics, can you read any fault codes?
Also, which engine do you have in the S60, the 5-cyl or the 6-cyl.?
Thanks
Also, which engine do you have in the S60, the 5-cyl or the 6-cyl.?
Thanks
Example of Precision: Measure with a Micrometer, mark it with Chalk, and then cut it with an Axe.
Disclaimer: We (very) seldom do that
2015 BMW 335i
2015 XC60 T5 Premier Plus
2002 S60 2.4 n/a - retired
1987 340 DL - retired
Disclaimer: We (very) seldom do that
2015 BMW 335i
2015 XC60 T5 Premier Plus
2002 S60 2.4 n/a - retired
1987 340 DL - retired
-
- Similar Topics
- Replies
- Views
- Last post