Replacing CVVT Solenoid for Code P1332

[t3yf5g]

You can’t trust the code reader descriptions , they are made up by twitter users.

Read the P code, then google it with Volvo , eg, Google “P1332 Volvo”to get the right description

HA! yeah I would agree with my old reader but I picked up a quality reader and the codes are accurate and match up with what I researched.

Oil leak related to an evap code? Please elaborate, that sounds like a problem worth fixing.

I tinkered today and check codes again and found a new one thrown for P0305 "cylinder 5 misfire". I'm fearing the worst until I can do a compression test to make sure I didn't burn up rings or something related to my oil leak relating to the evap code (I assume). Totally down for a bad coil or injector issue.

I'll start a thread going on this adventure for each the evap and 0305 / 1332 codes. Don't want to hijack a tech guide thread.

Looks like I will be driving the old 460 ford for a bit.

[dougrock]

Just thought I'd say "THANKS" to the person long ago who posted this thread...it helped some! and the comments had bit's too...

Just did this not even 2 mins ago. 2000 C70 with 87K miles, picked this up in a "sat in the garage" deal.

My issue was I could not for the life of me find the #1 and #2 writing on anything for the wires...Not on the org Volvo part nor the new one I bought. So I guess I will know if I get the "error" code. I happened to get the part for 44$, but U get what U pay for, it did NOT have any extra wires or the connecter to go in the new solenoid as the org volvo connecter would not work on anything U buy new.

well guess a prayer and a bit of luck? that the correct wire is in the correct slot..... regards to all!

[FlyingVolvo]

Just thought I'd say "THANKS" to the person long ago who posted this thread...it helped some! and the comments had bit's too...

Just did this not even 2 mins ago. 2000 C70 with 87K miles, picked this up in a "sat in the garage" deal.

My issue was I could not for the life of me find the #1 and #2 writing on anything for the wires...Not on the org Volvo part nor the new one I bought. So I guess I will know if I get the "error" code. I happened to get the part for 44$, but U get what U pay for, it did NOT have any extra wires or the connecter to go in the new solenoid as the org volvo connecter would not work on anything U buy new.

well guess a prayer and a bit of luck? that the correct wire is in the correct slot..... regards to all!

You're welcome! Glad my 14 year old post could help. These forums are invaluable for certain repairs.