98 S70 Radiator petcock

[mar601]

I know the radiator was replaced a long time ago. I'm having a real problem opening up the drain. It looks like plastic, like a wingnut so I'm using my hand and I'm afraid of breaking it as It's impossible to turn. (CCW right?). Anyway -- is there a trick to this?

I saw where the OEM radiator uses a 13mm socket but like I say this looks like the wing on a wingnut. -- thanks

[abscate]

The Nissens get s a quarter turn and then pulls down. If it doesn’t come, leave it and pop off the lower hose to drain

[wizechatmgr]

I'd suggest putting some silicone grease all over the threads and o-ring when/if you can get it out. Should make it easier to remove next time around.

[Sveedy]

I never fool with it. Just loosen the lower hose and " control " the draining from there.