Trim needed...

AlanS · Post by **AlanS** » 10 Feb 2024, 15:49

While waxing my car today (2006 XC70 OR), I noticed window trim and plastic parts that have worn and cracked. Where can I get a parts diagram so that I know the parts I need? Where can ancient parts for these cars be purchased?

Post by **jonesg** » 10 Feb 2024, 16:36

junkyard, enter your location in your profile.

Post by **scot850** » 10 Feb 2024, 16:46

Interior or exterior parts?

This may help for interior. Note there is info on OR parts needing to be painted.

https://www.volvocarstorontoparts.ca/a/ ... 78777.html

Neil.

AlanS · Post by **AlanS** » 10 Feb 2024, 17:30

Thanks Scott...I need #30 (a little triangular piece and #21- it says Not Available.

XC70Rider · Post by **XC70Rider** » 10 Feb 2024, 21:25

You can get #30 at a junk yard. Since the trim moldings are painted you'll have to match the color. I clearcoated all trim moldings 5 years ago and they were a pain to snap back in place. Had to order a few dozen new yellow clips.

Post by **scot850** » 10 Feb 2024, 23:23

If you put the part number for #21 into Google it comes up with European suppliers like Skandix supplying a new product. IPD are selling the parts as a full kit for both sides:

https://www.fcpeuro.com/products/volvo- ... kandix-tmk

Not cheap but it has all the parts you would need.

Otherwise as suggest, the junkyard is your friend.

Good Luck!

Neil.

Post by **jonesg** » 12 Feb 2024, 13:59

wow $274 vs $20 junkyard.