Window calibration 2007 XC 70

Post by **Blacklab467** » 20 Aug 2025, 20:26

Does anyone remember how to do that adaptive Window Calibration and can post it in a reply? I have a driver's window that goes back down when it hits the top. It will stay at the top if I continue to hold the up button for a second. I remember having to calibrate the window on my '03 because it wouldn't go all the way down.
Thanks in advance!

Post by **scot850** » 20 Aug 2025, 23:17

I'll try to check if Vida has the info tomorrow. I recall doing this on our 06 XC70 a long time ago.

Neil.

Post by **jonesg** » 21 Aug 2025, 00:47

From full open, start closing it and pull the fuse to stop it.
Reinsert fuse and close window normally, it should stay closed.

darylrobert · Post by **darylrobert** » 23 Aug 2025, 02:41

i had this recently and could only resolve it by VIDA. I tried all the remove fuse lock unlock 3 times etc and didnt work for my car anyway

Vova585 · Post by **Vova585** » 23 Aug 2025, 09:59

Never had to do it on Volvo. I believe on subaru it was-open the window till the end and hold the button engaged for 5sec. Then move the window up and hold the button for 5 sec. May need to repeat 1-2 times so the system will learn "stop" points. Not sure volvo follows the same logic.

Post by **jonesg** » 24 Aug 2025, 03:47

this worked for me.