2000 T6 Serpentine belt

wolfspiritky · Post by **wolfspiritky** » 18 Apr 2009, 16:22

I need to swap alternators on my 2000 T6. I was unable to find any info in the help data base. Can someone post a link. I'm not even sure how to loosen the tensioner to remove the belt.

THANKS

Post by **MadeInJapan** » 18 Apr 2009, 16:57

Hopefully this will help:

2000 S80 T6 Aux Belt Tensioner.pdf: (121.29 KiB) Downloaded 272 times

Post by **vegasjetskier** » 18 Apr 2009, 17:32

Dude, I'm afraid you've got your work cut out for you. This is in 6 parts because my VADIS will only print the screen, not the topic.

S80AuxBeltChange-1.pdf: (115.85 KiB) Downloaded 232 times

S80AuxBeltChange-2.pdf: (126.94 KiB) Downloaded 161 times

S80AuxBeltChange-3.pdf: (113.33 KiB) Downloaded 228 times

S80AlternatorReplacement-1.pdf: (118.03 KiB) Downloaded 161 times

S80AlternatorReplacement-2.pdf: (129.27 KiB) Downloaded 207 times

S80AlternatorReplacement-3.pdf: (120.67 KiB) Downloaded 134 times

Post by **vegasjetskier** » 18 Apr 2009, 17:36

Hey, MIJ, how do you get your VADIS to print the whole topic to a PDF? Mine will only do a "print screen," so I have to do each topic in several parts, which is a real PITA. Thanks.

Post by **vegasjetskier** » 18 Apr 2009, 17:54

Wolf, here's the procedure to remove the power steering pump:

S80PowerSteeringPumpReplacement.pdf: (185.76 KiB) Downloaded 219 times

Post by **MadeInJapan** » 18 Apr 2009, 18:10

I use a program called Win2Pdf...works very well!

Post by **vegasjetskier** » 18 Apr 2009, 18:17

MadeInJapan wrote:I use a program called Win2Pdf...works very well!

Me too. But the VADIS wouldn't print the whole topic. Then the last few times I tried it it started working all by itself. I guess the Volvo software is about as reliable as my Volvo car.

Post by **MadeInJapan** » 18 Apr 2009, 19:00

I don't know...my copy works fine ever time. Sometimes though when I switch over to my real printer, it still wants to make a pdf file. Rebooting the computer fixes this. Otherwise, I'm not able to print to pdf any of the one page parts diagrams so I just use the "Print Screen" key and PaintShop to make a jpg file for those.

wolfspiritky · Post by **wolfspiritky** » 18 Apr 2009, 19:03

Done deal......just needed to be sure how the tensioner worked!!

Saved my a$$ AGAIN Dave!

Thanks Buddy!!