front wheel hub replacement

tesladog · Post by **tesladog** » 23 May 2009, 17:33

Need some info about replacing a front wheel hub on 01" XC 70, it would be very helpful if someone could post an exploded view of the front end, and a list of any special tools needed.

Thanks
Tesladog

Post by **vegasjetskier** » 23 May 2009, 17:42

It should be very similar, if not identical to this. Just skip the part about changing the axle. And you don't have to remove the spindle from the strut, just pry the control arm down until the ball joint comes out of the spindle, then you can slide the spindle off the end of the axle and turn the strut enough to unbolt the hub.

https://www.matthewsvolvosite.com/forums ... hp?p=63174