93 850 with 256k stalls and won't start

[mbarron]

Hey guys I think I found something.
The 1590 ohms at pin 87 did not seem right.
I tested the resistance at pin 87 with the
ignition turned on, it read 2.6 Mega Ohms.
I don't know the specs for the fuel injector
current, but it would be a very tiny current
flowing at 12 V through that kind of resistance
- or am I looking at this wrong?
Where do I find the other end of the wire at pin 87
of the main fuel injector relay?
Thanks for much for reading.
____________
/ \
| 87 30 |
| |
| 85 86 |
| |
----------------

87 Thick Green
30 Thick Red
85 Thin Brownish
86 Thick Red

With Ignition Off
-----------------

Wire To Grnd Volt - To Grnd Ohms
87 0.0 1590
30 12.6 16 Meg
85 0.0 infinite
86 12.6 16 Meg

With Ignition ON
----------------

87 0.0 2.6 Mega ohms
30 12.6
85 0.0
86 12.6