98 V70 T5 wagon - front tire wear
Re: 98 V70 T5 wagon - front tire wear
I, too, get the best longevity by increasing tire pressures way up beyond what's shown on the gas lid door. I run 42 lbs all the way around. A rougher ride but my 50k wear tires do really now go 50k.
Greg Z
'97 850 wagon
'97 850 wagon
- matthew1
- Site Admin
- Posts: 14500
- Joined: 14 September 2002
- Year and Model: 850 T5, 1997
- Location: Denver, Colorado, US
- Has thanked: 2661 times
- Been thanked: 1255 times
- Contact:
Agreed. Since our 850s/70s suspensions are pretty tight ("harsh" even), especially the turbos, high tire pressures tend to wear these cars down.JRL wrote:Your high pressures will rattle these cars to death.
I'll never be able to prove it, but I'm sure that with a nice compromise ride like BMW we wouldn't be seeing as many ABS module failures. As many.
But hey, "you live with the suspension your Volvo has, not the one you wish it had".
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post

Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post

-
Craigd2599
- Posts: 419
- Joined: 10 January 2009
- Year and Model: 2007 S40.
- Location: Lynchburg VA
- Has thanked: 3 times
how are the control arms / ball joints?
Craig D
Philly Boy in Lynchburg VA
2007 S40 Previously: 2 850's and an S80
Waiting for that "R" model barn find
Philly Boy in Lynchburg VA
2007 S40 Previously: 2 850's and an S80
Waiting for that "R" model barn find
Sorry to differ with the experts, but I agree with gjz30075. I run 40 psi on the front. If I use the recommended pressure, tires wear out very fast on both inside and outside edges on my V70 AWD. The AWD is heavier in the front though.
1998 Volvo V70 AWD 165000-R muffler, HD endlinks, boost gauge
2008 Ford Fusion AWD 107000
2000 Ford Ranger 4wd 172000
1991 Toyota Camry 160000#1
Previous: 1982 Volvo DL (240) 160000
1998 Tacoma, Fords (6), Dodge, Montero,
GTO, Sunbeam Alpine, VW Dasher
---
2008 Ford Fusion AWD 107000
2000 Ford Ranger 4wd 172000
1991 Toyota Camry 160000#1
Previous: 1982 Volvo DL (240) 160000
1998 Tacoma, Fords (6), Dodge, Montero,
GTO, Sunbeam Alpine, VW Dasher
---
-
nightc1
- Posts: 93
- Joined: 1 September 2009
- Year and Model: 99'V70 Base 140K+Mi
- Location: Alabama, USA
Of note, the weight of the car as listed in the gas flap is dry weight correct? That is on an empty tank. When the tank is full that's another ~114 pounds of gasoline (19 gallons @ 6 pounds per gallon).
As for the volvo suspension, that's one thing I've been thinking to upgrade. It'll be better on me and the car for the suspension to do a better job than what the factory stuff is capable of. Regardless though, you get a harsh ride no matter what pressure
.... it's a Volvo.
But the tire wear is a clear case of under inflation. There could be another part causing this, but in most of those cases the wear is not even on the left and right... it's more lopsided or limited to one side or the other. Also, I'd be curious to know if those with this issue also didn't rotate their tires enough. That is at least every other oil change (or once every 6000 Miles).
This thread has made me curious though. I think I'm going to get my car weighed and see how the weight is distributed and how accurate it is compared to the sticker. There's a Cat Scales place a few miles up the road by the interstate. It'll cost a few bucks to do this but I'm curious what each axle is handling and these places weigh and certify (since it's mainly for truckers and they get in major trouble for going over weight).
As for the volvo suspension, that's one thing I've been thinking to upgrade. It'll be better on me and the car for the suspension to do a better job than what the factory stuff is capable of. Regardless though, you get a harsh ride no matter what pressure
But the tire wear is a clear case of under inflation. There could be another part causing this, but in most of those cases the wear is not even on the left and right... it's more lopsided or limited to one side or the other. Also, I'd be curious to know if those with this issue also didn't rotate their tires enough. That is at least every other oil change (or once every 6000 Miles).
This thread has made me curious though. I think I'm going to get my car weighed and see how the weight is distributed and how accurate it is compared to the sticker. There's a Cat Scales place a few miles up the road by the interstate. It'll cost a few bucks to do this but I'm curious what each axle is handling and these places weigh and certify (since it's mainly for truckers and they get in major trouble for going over weight).
-
Red-Arrow
- Posts: 449
- Joined: 26 August 2010
- Year and Model: 850 T5 1995
- Location: Scotland.
- Been thanked: 2 times
Ever heard of 60psi! used for good gas mileage but gives a wooden feel and harsh roller coaster ride feel.
I just deflated my tires to what I think is 40Psi according to the Shell Psi gauge.
I know 32 is very comfortable but is the legal liability rating given by tire manufacturers even if its not the best.
I just deflated my tires to what I think is 40Psi according to the Shell Psi gauge.
I know 32 is very comfortable but is the legal liability rating given by tire manufacturers even if its not the best.
Life would be enjoyable if it wasn't so painful to live.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 11 Replies
- 2222 Views
-
Last post by icrashcars
-
- 9 Replies
- 2054 Views
-
Last post by thedancingfiddle






