VADIS, Parts logon USER ID? PASSWORD

Romort628 · Post by **Romort628** » 15 Sep 2009, 18:53

I just got a VADIS CD in the mail loaded it thru windows xp
to access thru, windows it ask for USER ID and Password.
I wasn't supplied with that with this cd....... After looking at the back of the case it says to load this via MS DOS...
not good with dos never have been, why can't I run this thru windows and will it still ask for passwords and IDs.

Post by **Ozark Lee** » 15 Sep 2009, 20:19

Did you reset the clock June of 2004 before the install?

Here is the installation instructions that came with mine - it may or may not be good for yours but it is worth a shot - it seems the same bootlegged thing is viral on ebay and the internet.

Vadis set up instructions.rtf: (9.09 KiB) Downloaded 6988 times

...Lee

Post by **w5bvb** » 16 Sep 2009, 04:36

I got my copy of Vadis off eBay from someone
in the UK. My copy installed and runs fine under
Windows Vista without worrying about DOS mode but
you do have to right click the icon and run it in
administrator mode. I did not have to reset the date/clock.

I just followed the instructions that came with the CD's.

good luck, Phil

Romort628 · Post by **Romort628** » 16 Sep 2009, 05:59

Thanks guys when I went into the instructions on the disk thats where I did find the logon and password.