Coolant Reservoir lifespan question...
- erikv11
- Posts: 11913
- Joined: 25 Jul 2009, 14:03
- Year and Model: 850, V70, S60R, XC70
- Location: Iowa
- Has thanked: 312 times
- Been thanked: 818 times
For the kid far away (Chicago) I just sent the 99 Camry. Almost nothing breaks on that car.
'95 854 T-5R, Motronic 4.4, 185k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
-
cn90
- Posts: 8363
- Joined: 31 Mar 2010, 09:54
- Year and Model: 2004 V70 2.5T
- Location: Omaha NE
- Has thanked: 4 times
- Been thanked: 504 times
Haha,
I used to have a Camry and Corolla.
They still break but smaller stuff, nothing catastrophic.
The Volvos are a bit more "delicate" to handle, but also a better car than Camry (boring).
I used to have a Camry and Corolla.
They still break but smaller stuff, nothing catastrophic.
The Volvos are a bit more "delicate" to handle, but also a better car than Camry (boring).
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
2005 XC90 2.5T 110K+
- mrbrian200
- Posts: 1554
- Joined: 20 Jan 2016, 08:47
- Year and Model: 2006 S60 2.5T FWD
- Location: Northern Indiana/Chicago
- Has thanked: 7 times
- Been thanked: 84 times
My reservoir is fine. However, the rubber hose lost it's plasticity and wouldn't keep a tight seal at the reservoir connection at around 115k miles. This resulted in a slow drip of about 1/2 quart of fluid every 3-6 months from the bottom of the reservoir that would drip down the area around the front bushing on the LCA. Tightening the hose clamp slowed it down but it didn't stop until I replaced the rubber hose.
-
Georgeandkira
- Posts: 901
- Joined: 07 Apr 2009, 08:24
- Year and Model: '07 V70 + '15 XC70
- Location: Hudson & Champlain Valleys, USA
- Has thanked: 80 times
- Been thanked: 71 times
Just popped into my skull from years ago.
We serviced a neglected Ford truck's cooling system and cleaned the reservoir with some leftover swimming pool filter cleaning agent (no label, just a gallon jug). It made the dirty thing look new, I swear.
I was afraid to let the stuff touch my skin because it worked so well. Sorry I don't have the name.
+1 on the stiffened hose posted above.
We serviced a neglected Ford truck's cooling system and cleaned the reservoir with some leftover swimming pool filter cleaning agent (no label, just a gallon jug). It made the dirty thing look new, I swear.
I was afraid to let the stuff touch my skin because it worked so well. Sorry I don't have the name.
+1 on the stiffened hose posted above.
-
jimmy57
- Posts: 6696
- Joined: 12 Nov 2010, 09:25
- Year and Model: 2004 V70R GT, et al
- Location: Ponder Texas
- Has thanked: 5 times
- Been thanked: 322 times
I am in Texas and I have not replaced a failed P2 coolant reservoir except for level sensor hanging. Plastic pieces die sooner here. Not a bad idea to replace it as it will happen eventually and it is better to hand money to a parts guy than to a tow truck driver.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8 Replies
- 1061 Views
-
Last post by Ozark Lee
-
- 12 Replies
- 7318 Views
-
Last post by RickHaleParker
-
- 4 Replies
- 403 Views
-
Last post by scot850
-
- 1 Replies
- 813 Views
-
Last post by 93Regina
-
- 14 Replies
- 2176 Views
-
Last post by XC70Rider






