Noise from PCV diaphragm when dipstick pulled

Post by **IronMike** » 08 Mar 2020, 06:21

Went with one of these cheap units for $60, see how it does... https://www.amazon.com/gp/product/B07F2 ... UTF8&psc=1

Post by **pgill** » 09 Mar 2020, 07:33

Mike,

The original part is expensive.

Let us know if the replacement part bolts on without modification.

Good Luck

Paul

Post by **pgill** » 23 Mar 2020, 16:03

Mike,

For reference

Positive Crankcase Ventilation (PCV) check
Perform a crankcase ventilation test according to VIDA. Using the tool specified in
VIDA, the gauge will seem “out of range”. Normal PCV vacuum at idle for the Si6 and
Si6T engines is between -0.2 kPa and -1.0 kPa.

Take care

Paul

thehearse850 · Post by **thehearse850** » 18 Aug 2022, 09:53

Was this ever resolved?

I have the exact same issue with a brand new part from PPS - PPS-21439642