Quickjack system

Post by **ZionXIX** » 04 Jul 2019, 20:21

I thought quickjack had rubber blocks with grooves to accommodate pinch welds?

Post by **MoVolvos** » 04 Jul 2019, 20:45

ZionXIX wrote: ↑04 Jul 2019, 20:21 I thought quickjack had rubber blocks with grooves to accommodate pinch welds?

-

You had to ask

. Now I'm curious to find out what I purchased

.
-

Post by **MoVolvos** » 04 Jul 2019, 20:46

-
Smells so bad. Combination of that raw Chinese rubber, damp ash tray full of butts and skunk. Yes, I had a room mate from high school for a year that...

Post by **abscate** » 05 Jul 2019, 04:31

That overload test Is impressive

But still , I’ve never needed hardware for a quick jack

I just tell them to get out of their car, quickly

Warmfuzzies · Post by **Warmfuzzies** » 14 Jul 2019, 14:13

Successful lift!

Placed the rubber blocks along the pinch weld by the arrows on the plastic molding

You do have to mind the brake line towards the rear but it seems like it’s safe to lift here. I will still reinforce with jack stands

Post by **MoVolvos** » 14 Jul 2019, 17:33

-
Great, a real car / Volvo on the lift. I'm still cleaning and reorganizing the garage. Seems like I'm never gonna get there

.

Post by **ZionXIX** » 14 Jul 2019, 17:47

MoVolvos wrote: ↑14 Jul 2019, 17:33 -
Great, a real car / Volvo on the lift. I'm still cleaning and reorganizing the garage. Seems like I'm never gonna get there .

I'm in a similar boat

Post by **MoVolvos** » 14 Jul 2019, 18:01

ZionXIX wrote: ↑14 Jul 2019, 17:47
MoVolvos wrote: ↑14 Jul 2019, 17:33 -
Great, a real car / Volvo on the lift. I'm still cleaning and reorganizing the garage. Seems like I'm never gonna get there .
I'm in a similar boat

OK, another fellow sufferer. Looks like you and I are gonna have to encourage one another to lose that weight. Oh wait, that's another seemingly impossible unrelated issue. However, now I'm motivate to get in there but (there's the but again) it's hot all day here at this time so it does not help

.

Post by **MoVolvos** » 25 Mar 2020, 20:22

ZionXIX wrote: ↑14 Jul 2019, 17:47
MoVolvos wrote: ↑14 Jul 2019, 17:33 -
Great, a real car / Volvo on the lift. I'm still cleaning and reorganizing the garage. Seems like I'm never gonna get there .
I'm in a similar boat

Finally cleaned the garage BUT not enough to pull the car in for repairs. Hope to get there in a week or two. I did however clean my folks garage enough to work on the cars there using the Quick Jack.

So far on the 03 Odyssey and 19 Atlas were only able to raise it to the first click / height. Vehicles are too tall to clear the opener. Was not able to use the vehicle Jacking Points as the Quick Jack was not long enough.

Did work perfectly for the 08 C30. Will try it on the 03 S80 sometime this week, hopefully.
.

.

Quickjack system

Re: Quickjack system