I want to replace the leather upholstery on the driver side seat on my 960. The leather covered head rests defy my attempts to remove so the new/repaired seat back replacement can be accomplished.
The seat head rests seem to have a zipper closure underneath but, the zipper ends are hidden by a plastic end cap on either side.
My daughter has a 740 estate in which the rear seat head rests come out easily when you want to fold the back seats down for more cargo room BUT, I cannot find any "button, latch, or lever" to get the 960 headrests out.
HELP!!
Wallace L. Johnston
[email protected]
or
[email protected]
removing headrests for re-upholstery project Topic is solved
-
matthew1
- Site Admin
- Posts: 14466
- Joined: 14 September 2002
- Year and Model: 850 T5, 1997
- Location: Denver, Colorado, US
- Has thanked: 2652 times
- Been thanked: 1242 times
- Contact:
This might help, although it's for back headrests:
More:
http://www.google.com/search?q=how+to+r ... 8&oe=UTF-8
on here about 2/3rd way down:http://brickboard.com/FAQ/700-900/RadioAntenna.htmRemove 2 Remaining Headrests--Take out 2 bolts w/ 10mm heads, each side, remove reinforcement plates, withdraw headrests and set aside.
More:
http://www.google.com/search?q=how+to+r ... 8&oe=UTF-8
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post