Here's a pic of the leak
2000 S80 T6 can't find source of oil leak
-
BobbyMang
- Posts: 20
- Joined: 7 April 2013
- Year and Model: 2000 S80 T6
- Location: Nashua, New Hampshire
2000 S80 T6 can't find source of oil leak
Hey everyone, I was changing my oil today and found that I have quite a big leak. I suspect it's the oil pan gasket but I wanted your opinions or experiences.
Here's a pic of the leak
Here's a pic of the leak
2000 S80 T6 -IPD HD Turbo Control Valve w/ Silicone tubing, K&N Air Filter, IPD Strut Bar Conversion kit, Ultra Racing rear chassis bar, IPD "R Kelly" CAI Kit, IPD Poly Upper Engine mount.
-
JDS60R
- MVS Moderator
- Posts: 3532
- Joined: 21 February 2009
- Year and Model: 2007 S60R 2016 XC70
- Location: Mount Juliet, TN
- Been thanked: 3 times
Hi,
Clean it down with some spray carb cleaner (chemtool B 12 is a favorite of mine). Remember to wear eye protection. Once clean we can see where its coming from.
Clean it down with some spray carb cleaner (chemtool B 12 is a favorite of mine). Remember to wear eye protection. Once clean we can see where its coming from.
Retired
-
BobbyMang
- Posts: 20
- Joined: 7 April 2013
- Year and Model: 2000 S80 T6
- Location: Nashua, New Hampshire
Will do! I was looking through maintenance records and the previous owner had the pcv breather system replaced due to clogging. So I suppose that's eliminated as a source. I have a minor surging issue as well so I suspected that the pcv may have been the issue. Now I'm not sure.
2000 S80 T6 -IPD HD Turbo Control Valve w/ Silicone tubing, K&N Air Filter, IPD Strut Bar Conversion kit, Ultra Racing rear chassis bar, IPD "R Kelly" CAI Kit, IPD Poly Upper Engine mount.
-
- Similar Topics
- Replies
- Views
- Last post