Big change in 1998 to 1999 in both mount, pulley direction, and pulley freewheel

P2 also started using variable field control so you have to be careful getting parts there

Wow you have been busy!

Neil.

I know the P2 goes from 140-180 amps, but I was aiming at the 200 amp that i thought existed for the 98 v70. I want to buy the factory AC power inverter system out of a 2012+ ford/lincoln vehicle and install it in my 98 v70. With the additional power draw, I want to eitehr put in a stronger (more C...

Great back story. (no pun intended)
volvolugnut

What engine is in the red one? Doesn't really sound like a Red Block. ?

FIRST: Last night I reinstalled the fuel rail with a fresh set of fuel injectors that I rebuilt a few years ago. They might be from my 960. I also installed the longer IAC hose that took about 3 weeks to get here from Sweden. Attempted start. No start. I heard dripping and smelled gas (same smell a...

Very rare for a non 240 to be in advertising.

2 hours on Elizabeth the T5

Wiped and oiled cylinders
Installed head gasket
Installed thermostathousing
Installed cylinder head
Torqued cylinder head bolts
Installed 2 m6 water pipe bolts.

She will ride again sokn

Got all the parts to do a manual swap on my 850 - plus stage zero maintenance and other upgrades. Decided to go a different direction and now selling everything. All parts are brand new still in packaging unless notated (used). Additional pictures available on request. Zelle/Venmo/CashApp/Paypal F&a...

Take the whole head liner out and the sunroof 'cassette'. You will be glad you did as it is a challenge to get access to some of it and some you can't disassemble without removing it all.

Neil.