The bracket on near #5 cylinder nuts that holds the pipe that runs along the front of the block always seem to manage to get trapped between the block and the intake. And we have a winner ! I fully expected a dumb error during assembly, and it was :mrgreen: My old engine didnt have this bracket bec...

Yes, I run E85 on mine. If you get a tune from Vast (the best M4.4 mapper you can find) you have the option to get two maps, one for gasoline and one for E85. You can switch them "on the fly", afaik he's the only one that does this. Just remember that E85 needs more volume (about 30%) for ...

Personally, they annoy me a little because they don't seem to fully return to their horizontal resting spot very well, and I don't find them all that useful. You might find the results of this poll interesting. I deleted mine. https://www.matthewsvolvosite.com/forums/viewtopic.php?f=1&t=49983 S...

Mine is a Vag Com KKL with the 409.1 chip, works great with Vol fcr. Nothing fancy, just your average 10$ cable from ebay.

Didnt work on a Volvo today, went to a car show/trackday at Le Mans with the 940. Saw a few Volvos https://i57.servimg.com/u/f57/16/41/73/43/img_2362.jpg https://i57.servimg.com/u/f57/16/41/73/43/img_2363.jpg https://i57.servimg.com/u/f57/16/41/73/43/img_2361.jpg https://i57.servimg.com/u/f57/16/41/...

so.... the whole interior ?

To be honest the dash elements feels stronger than the 940 ones, the vents on these like to explode when you look at them wrong!
Headliners trims on the other hand feels a little stronger on the 940s, but that might just be my cars

FWD wheels have the mounting face more towards the outside of the wheel than RWD, so RWD on a FWD volvo will stick out more For reference, this is my V70 on ET30 6.5" wide 16" steelies with 205 55 tires. Just fits without rubbing on anything, but it's close. https://i.servimg.com/u/f57/16/...

Go big or go home



Went big and needed a tow truck to go home

I've always pulled the motor and gearbox together, taking them apart in the car looks like a pain (but I might be wrong).

Goes out from the top, just need to go slow and avoid damaging the ABS module (a load balancer on the engine hoist helps)