The most comfortable setup on these cars that I've experienced is Bilstein B4 shocks/struts and H&R 29955 lowering springs. Rides better than stock, looks great, and handles fantastically. By far the best setup for P80.

And just like that, it’s fixed! Finally. No temp sensors on MCC as far as I can tell. It’s really archaic. Reading through my symptoms, it seemed a whole lot like a really exaggerated case of the compressor clutch needing shimming, so I shimmed the compressor anyway, figuring it can’t hurt. In the p...

Hi! Thank you! For remote functionality as i point in Help section of Remote programming window in the App: This is up to frequency of the remote which differs per remotes. Technically you could replace soldering the component behind of it to make it as other one in theory level. Its too why i on v...

Kiitoksia!

850 OBD-II works fine. It found me the PIN-code for V70 year 2000, but however, I did not manage to program new remote controllers. It looks like it does not "hear" the signal during that 10 seconds.... There is error code in alarm; one window wire is cut. Could that be the reason for not ...

Sorry much of late reply. I was actually in Japan when this was posted. On 850 if its Motronic M4.4 yes it has both Lambda Voltages and Fuel Trims but M4.3 not with App sadly due how it talks. I believe I have the Motronic 4.3. How do I see O2 sensor numbers? I think this ECM has been touched best ...