This guide was written by a friend. He was not able to find a good guide for this anywhere so he wrote his own to benefit future DIYers. Attached is a word document of the guide for your printing pleasure. ----------------------------------------------------------------------------------------------...

I'll get photos soon, I promise.

I bought one of those newer style caps too. I used the upper door hinge screw to attach the tether.
Later on, I found an original hook-style cap in great condition at the junkyard, so I removed the newer style cap and tether and switched back to the old style.

Busy Summer! I still love MVS. I simply have not been taking as many photos as I would like.

Thank you, going to order that now. Looks like Im going to be doing another fresh fill sooner than I anticipated.

Just to confirm (if you can), 3549224 is the OE part number for the drain plug, correct? FCP Euro's site is unkind to 960s and what parts are supposed to fit.

The lock cylinders are the same only the levers for linkage have the R and L difference. Remove the E clip and swap levers and you're good to go.

A friend asked me about advises to buy an old Volvo. After two week of research he came back to visit me with this beautiful 244 from 1979! so glad!

We have 4 The wife's Turbo Momcar™ ('97 GLT with mods) https://turbochuckcom.ipage.com/webimages/projects/97%20Volvo%20855/TMC_08_19_18.jpg My '97 T5 w/ XC70 nose https://turbochuckcom.ipage.com/webimages/projects/97%20Volvo%20854T5/2019/Neptunes_1.jpg My 80 264 GLE (B21FT/MS) https://turbochuckcom....