Runs and starts much better now, I found out that he insulation from ignition coil wires where damaged / cracked. It was a miracle that the car was even running and or starting. It only takes a bit longer to start when the engine is hot. But I am waiting on codes to come up before replacing cam or c...

Good practice is to examine and replace any crumbling wire loom under the hood. It really helps protect wires and looks good too. If you do this replacement, only use wire loom rated for 275 F or above and use good electrical tape like 3M Super 88. Easy project and rewarding in reduced electrical pr...

If you bent a valve or two, just replace with used valves. Pulling the head is straight forward. Find a paper manual (Haynes is common) if you do not have one. Don't buy any parts until you know what you have done. You will learn much in the process.
volvolugnut