The only axle I could find (period) that might work is the Trakmotive VO-8041, despite unclear fitment information. I'm going to give that a try, unless someone chimes in and says I definitely should not. Just wanted to confirm that the VO-8041 is a perfect fit for a passenger side M66 AWD axle, I ...

I just want to send Thanks to all in this thread. It is very valuable and give me a quick boost start to read out information from my ECU, V70 2006 BiFuel. Denso ecu wuth a sh7055 cpu. I started off by the simple scripts and code dikidera provided. They run successful and was able to read out flash....

I just got my non-rusty bar out. I could have shipped it to you!

Read the codes with DiCE/VIDA, it will tell you what's wrong. A generic OBD scanner can't tell you the whole story.

Some more analysis of eeprom data. This information is probably already in this thread somewhere but can be informative to show it again (if anyone is interested). It is from my V70 BiFuel 2006 Denso ECU with CEM-L. Sync data between CEM and Denso ECU. In CEM eeprom data is in duplicate with crc, in...

Not sure where to start to resolve these codes. ABS warning light and Brake assist warning lights are lit on dashboard OBDII CODES Read AS FOLLOWS: BCM-C00201C ABS PUMP MOTOR CONTROL BCM-C004664 BRAKE PRESSURE SENSOR "A/B" Signal Plausibility Failure BCM-U042864 INVALID DATA RECEIVED FROM ...

13 mm socket on a long extension, behind the sway bar. Only 1/4" extension fits as is, but you can push the sway bar with crowbar upwards and make space for 3/8" extension.

Back in the old days, Behr and Valeo (the original suppliers for BMW, Volvo) offered radiators in the aftermarket.

Now they don't do that any longer.

So now we are stuck with Volvo dealer inflated price of > $400...if we want original stuff.