I've put a four bolt front hub on my '96 850 when an eBay seller sent the wrong part. Everything fitted perfectly, I didn't even notice it was the wrong part until I tried to put the wheel back on.

Wait, how do you get the brake over the hub? Or does the rear disc clear the hub?

It seems you're good to go then... grab a hub and give it a go! Wait, how do you get the brake over the hub? Or does the rear disc clear the hub? The rotor should go back on, the CB is the same. It'll probably even allow the guide pin to be installed, but the holes won't line up. The wheel will go o...

I’m trying to remember if I have these in my “ send me a pm and I’ll mail them to you” box in my North office.

I think I do, I’ll check Tuesday

You think a lot of people would be interested in this kind of thing? Lots of people will be interested, and 99% of them will then buy a new one from FCP with a lifetime warranty. :D :D :D It's a great academic exercise, but not one that would be financially viable. Hi, Yes i think that's right. Som...

Watching the video and hitting the thumb button helps with his visit count and nudges the Y/T algorithm, but we're likely talking pennies given the size of his audience.
Not only was he feeling poorly, he lost a weeks work too.

To answer your post question, no. As long as you have clean copper, good quality 60/40 rosin core solder ( I prefer a smaller diameter, like .031" ) and can handle a soldering iron, this should be a non-issue. The shrink goes on first! Ask me how I know... Try to to use a good quality, dual-wal...

On these cars...in fact in almost every car ...if ambient temperature sensor is not working...ac will not start because ecc will not know what is ambient temperature in order to protect compressor...since ac will not work if ambient temperature is below 2C(when orange light for snow flake lights up)...

Have you tried Rock Auto? They list an SKF for the rear. I just bought front SKF, so check if they include new mounting bolts as I was told by SKF they did, but they didn't. The bolts should be replaced as they are stretch bolts.

Neil.

Read this: