I think 23 is the only gotcha part there, with a 19x 13 ID size change Ed.. as payfoward for recent sheparding duties , let me know if you need Gates barricade fuel line for any of this work. I bought rolls to redo the S70 so have it in ample sufficiency. It’s expensive, like $6 a foot in short piec...

I've replaced the hose shown in image #2... More detail available here:
viewtopic.php?p=369977

Link to tank drop thread

viewtopic.php?f=1&t=92034&hilit=P80+fuel+tank+drop

Just last week I dropped the tank on my '95 wagon. I was less than thrilled at the idea because I had stored it with a full tank of fuel. After siphoning the fuel out through the now removed fuel pump at the top of the tank...it was surprisingly straight forward. Just remember to unhook the wiring g...

Exhaust manifold that I took off the car over the weekend, 2000 V70xc

New problem though. I have everything disconnected from the heater box, but it won't come out. There seems to be something still connected right in the center between the left set of screws: DSC_0194.jpg It feels like I would have to yank really hard, or something would break. Anybody know what to ...

You need to... Set the timing to the reference marks. Remove both bolts Remove the tensioner and compress it slowly, then insert the pin to hold it compressed. Now see if the bolts will thread into those holes and chase or tap as needed. Reinstall the tensioner and torque bolts to spec. Pull the pin!

I would like to spruce up my interior on my 1997 850..... The P80 70 series is a 850 with a make over. Yes, true fact Being both P80 cars. Most of the interior should swap. Actually Rick, almost nothing swaps. Perhaps if you swap absolutely everything it would all mount up, could be worth some sear...

viewtopic.php?t=99882

Hurry. But make an offer .

In my experience, the heater hoses will last forever as long as you don't touch them. :lol: Inspect the hoses. If there are no bulges, cracking, or signs of seeping, then they are probably serviceable for a while longer ~200k. They are all easy to replace baring the coolant supply line that runs to...