Thanks for the heads-up these periodic sales are definitely worth waiting for to buy parts from the dealer. I cross-posted this into the running thread.

Retitled but will add cut indices later on. Elapsed time, 3 hours at leisurely pace. Chock jack and block car up to one main stand under rear axle carrier, two stands under rear torsion arms I added two safety jackstands under pinch welds since Ill be rolling underneath Took about an hour to remove ...

Picture gallery

This is a good writeup, but unfortunately the V70 (not XC) is quite a bit different. I have an '05 2.5T. Up through removing the top exhaust shield with the three rivets and two nuts is identical. But the three torx screws that mount the pump are not visible or accessible. There appears to be a long...

Could you cut an access hole from above using a dremel? I saw that in a j-hose replacement thread one time and thought it was a brilliant idea. I assume you are responding to my comment on this old thread. The same thought occurred to me, or the fantasy of access from above. I have additional infor...

For sale is my 05' Volvo V70, base, 5-speed in mistral green with tan interior. It has close to 157k miles on it now and the car is well maintained. I think it is in slightly above average condition overall. Everything works as it should with no warning lights showing on the instrument cluster. The ...

I think the answer is in VIDA. I configured my 2014D to use the International catalog and I believe the change for the Diesel engine occurs in 2006. That year notes the D5244T motor with the AW5x and the D5244T4 motor with the TF-80SC. After 2006, all Diesel motors are mated with the TF-80SC, at lea...

On my walk this moRning.......

Here, who has 6 byte code, CEM from MY2006- and DICE-206751 absoloutly FREE...
Reads your cems complete flash in a few seconds...

https://filetransfer.io/data-package/bsTYjdGO#link

.. high up sh*t cut ... How about people here already made their financial future, well, secured, because they have their day job, which pays some competitive money? There's always a high demand for brains outta here, right? Trying to monetize this niche project for niche car versus working for alm...