Loved this writeup was very helpful! here are some extra tips i had that i struggled with for others. I have a ZF rack 92 940, when i tried using the soul of the shoe and vice grips it wasn't enough grip. I tried instead stacking a couple rounds of duct tape around each prong of the vice grips and t...

Well I figured it out. What threw me was that the fitment guide calls for 2 of each front camshaft seals, but in reality you use a different seal on the exhaust than the intake. So one of each is needed. So 3 different part numbers for the 4 cam seals. And yes; that banjo bolt for the PCV is beyond ...

Many moons later I finally had enough motivation to dig out the valve cover of the scrap B5254FS I have laying around aaaaaaaaaand the cam shafts are not the same as the scrap cam shafts of the B5244T3 which are also laying around (but those probably have the same dimensions as the B5244S2 I have in...

Making slow incremental progress. Get in an hour or three after dinner. I wrecked this ring and tried to flatten it - hah. O-ring is like rock - 60 years old. This is the seal on the bottom shaft of the steering box. IMG_8199.jpg New bronze input shaft/pilot bushing. I boiled it in oil like taught i...

After I have corrected the polarity the reader works fine.
I have put together some footage below and again thank you all for supportive input.

I am reading the result like this: I - I - I = no DTC stored
Am I correct?

The carburetors will have to go in the kitchen with Gramma's fine china. Not my work - this is in Chicago, being rebuilt / repaired / restored by a wizard named Gordon Raymond. I had inaccessible clogged passages in the bottom (drill out the lead plugs), and a broken alum/magnesium float pivot suppo...

.
Saw this in the first minute of the video.
. .

.

If you own an AWD Volvo, at some point you will inevitably have to service/ replace/ remove or repair the angle gear, collar sleeve, various seals or propshaft components. I've done this job many times and hope that this tutorial will help and clarify the job and demonstrate the easiest and most eff...

https://youtu.be/TNW1ftzCggA I am back from all work life situations changes what happened in private life side which took last months mostly my time and learning new things.. but back with new toy to share. Be noted this is more for like professional use who can do errors and mistakes to fix them d...

Well turns out there was an issue with the tailgate left harness wiring. Looks like one of the previous shops attempted to repair a couple broken wires and did a subpar job. I cut and re-soldered them, reset the DTC, and now the faulty signal condition hasn't come back. Usually it would come back ri...