Search found more than 2659 matches
- 12 Mar 2020, 02:33
- Jump to forum
- Jump to topic
- 13 Mar 2020, 15:22
- Jump to forum
- Jump to topic
- 13 Mar 2020, 20:28
- Jump to forum
- Jump to topic
Re: There are only crickets in here...
We had old ladies speaking in tongues at the grocery store. Houses had either a Norwegian, Swedish, or Finnish flag on the porch. We were not allowed to move in until we bought a used 240 wagon - it’s in the bylaws or zoning or something. We had five 240s just on our block. Norwegian Day parade was ...
- 13 Mar 2020, 22:45
- Jump to forum
- Jump to topic
- 14 Mar 2020, 18:06
- Jump to forum
- Jump to topic
Re: Fixing your flip /switchblade key - pics and advice
@theblues - the exact same procedure I described above will work. You'll have to get a new key blade cut, but that's not the expensive part. I have seen blank blades on eBay. What costs is the transponder and the programming required. Dealers will get you on that. It's been over a year since I fixe...
- 15 Mar 2020, 03:32
- Jump to forum
- Jump to topic
Re: There are only crickets in here...
There was a Norwegian immigrant on my mother's side of the family. He worked for Gulowsen Grei Engine Company in the Alaska building in Seattle. In 1919 the Norwegian company completed a new six acre manufacturing facility at Salmon bay just east of the Ballard locks connecting lake Washington and P...
- 17 Mar 2020, 06:21
- Jump to forum
- Jump to topic
Re: p80 302mm brake bracket available again! 8251319
Still available as of MAR 2020 from FCP
- 18 Mar 2020, 10:48
- Jump to forum
- Jump to topic
Re: Coronavirus Thread
Dr Jammer, start a thread on the rear sub-frame issue with your fuel tank and I can then reply to that to see if I can help guide you to the options you have.
Neil.
Neil.
- 21 Mar 2020, 21:56
- Jump to forum
- Jump to topic
Friendly reminder to avoid Lemforder/Chinese strut top bearing mounts/plates
Hi everyone. I just wanted to share my most recent experience with these extremely low lifespan units. I bought a small pile of the Lemforder's a while back. Incidentally, this was around the time Lemforder changed manufacturing of these from Germany to PR of China. As stated by several smart people...








