Search found more than 2659 matches
- 16 May 2020, 11:36
- Jump to forum
- Jump to topic
Re: What did you do to your Volvo today?
I painted my fuel rail cover in gun metal gray.
- 16 May 2020, 11:42
- Jump to forum
- Jump to topic
Re: Volvo Findings! (What have you found on Craigslist?)
https://minneapolis.craigslist.org/hnp/ ... 37186.html
Seller says they will let the set go for $160. Good deal.
Seller says they will let the set go for $160. Good deal.
- 19 May 2020, 20:18
- Jump to forum
- Jump to topic
Re: Harbor Freight Jack Stands Recalled for Risk of Collapsing
I asked the dude at HF years ago why they have several lot numbers for the same thing... He said they have several manufacturers making the same part, so each manufacturer is assigned a different lot number.
- 21 May 2020, 14:59
- Jump to forum
- Jump to topic
Re: Thanks for using the MVS-Amazon link!
Ok, thanks for the explanation.
I'm on the right track in that I put things in the cart but may not pull the trigger for a couple of days.

I'm on the right track in that I put things in the cart but may not pull the trigger for a couple of days.
- 24 May 2020, 17:14
- Jump to forum
- Jump to topic
Re: Help with powering S60 seat -- Not in a Car
For the 2003-2004 seat model, see the following pictures.
You will only have to connect motors and battery to the freshly cut switch cable, as shown in the last image.
Mathew, thank you for this site.
You will only have to connect motors and battery to the freshly cut switch cable, as shown in the last image.
Mathew, thank you for this site.
- 28 May 2020, 18:50
- Jump to forum
- Jump to topic
Re: 2006 XC70 - Christmas :-/
I had similar/same symptoms last summer. It was DEM. Here's the broken part: https://a.d-cd.net/eQAAAgKXaOA-960.jpg Hand is not empty =) Oxidation: https://a.d-cd.net/5QAAAgKXaOA-960.jpg One resistor in the top right corner looked suspicious: https://a.d-cd.net/GQAAAgKXaOA-960.jpg Had it desoldered ...
- 01 Jun 2020, 19:21
- Jump to forum
- Jump to topic
Re: SOLVERD: Tried to use injector cleaner tool at the schrader valve
Just catching up on this post. I lowered the air pressure on the injector cleaner tool to below 30 psi. Everything worked as it should. The engine ran at idle and the cleaner was passed into the injectors, not back to the fuel tank. Thanks everyone for your input.
- 02 Jun 2020, 11:19
- Jump to forum
- Jump to topic
P1900 introduction today 1954
According to my Hemmings Motor News calendar, today was the unveiling of the first Volvo sports car - the P1900. This was an attractive fiberglass body convertible. Unfortunately, it was not a commercial success. Several years later the P1800 was successful. Google P1900 for more information. volvol...
- 03 Jun 2020, 04:21
- Jump to forum
- Jump to topic
- 23 Jun 2020, 06:28
- Jump to forum
- Jump to topic
Re: 2004 XC-90 Rear Wiper Motor Replacement Experience
I found the rear wiper motor to be expensive so I took it apart. There is a plastic cog gear that gets the teeth worn off probably from the wiper getting stuck on ice or something. The wheel can be purchased cheap and so I am trying that forst (I just ordered on ebay). The reason I think this might ...






