Just completed installing 4 subframe bushings and new spring seats with genuine Volvo parts. Its a pretty straightforward job for those contemplating it. I didn't document the spring seat install as it is a simple process. Subframe bushings should take 3 or 4 hours with hand tools, nothing special r...

Here's the link to a post I did last year. No special tools required! Don't compress the feet, I have a picture of something I rigged up so that you don't compress the feet. Let me know if you have any questions. It's a nice easy job with rewarding results!https://www.matthewsvolvosite.com/forums/vi...

Perhaps Allied Elecctronics Supply https://www.alliedelectronics.com/srch.html can supply appropriate crimp tool.
volvolugnut

Hello All, I have solved the issue.I am not expert in CAN networks. Here is the logic I used to diagnose the issue before throwing another unnecessary replacement module: A missing resistance on one end meant to me that either one of the essential modules is fired or there is a brake in the network ...

I had an issue with the 3rd row seatbelt installation on my XC where I let them extend beyond their limit and then had to manually retract them. I prefer to keep my sanity than ever have to mess about such a thing again...

.
2003 S80 T6 Executive. Second Volvo first P2 since joining MVS in 2012. Was in the process of installing the trim rings. Never finished as transmission went out and car eventually went to the yard.
. .