For the windshield bottom, you mean where you clip the plastic tray into the glass? I destroyed mine, there is a replacement available from skandix/volvo. It was a different part but fitment was better than with the old one. don't have the pn right now. For the rubber seal on the roof racks I would ...

I believe so. They should all be the same.

We fought and slayed the dragon of transfer of PS rack parts… Aluminum heat plate Center mount Left plate mount Installed , mounted, then tightened the ps lines with engine out. I needed crows feet to do this , even with the engine out. Also managed to coat a headlight reflector with rustoleum silve...

It looks like a version of the release bearing that is a fork type rather than the piston type that is more common on our cars.

I happen to have an M56 apart in the workshop that doesn’t have this “ snout”

I cut a 1998 Volvo s70 ignition lock apart. In the small groove running around the lock body there is a steel ring and holding the ring in place is a tab that runs across the entire body of the lock, so once you get the end of the tab out of the way you can pull the steel ring out a little bit and ...

I went to google images to find a few examples, and came back on MVS !
viewtopic.php?t=63615
cn90 has the same thing on his S70, and according to his profile he's in the US. Maybe it was a factory option ?

With all the treat of war these days, doesn't everyone have a concrete bunker under the house?? :o :lol: :lol: The original owner of the house added to the back of the house which has 2 rooms up joining the main floor and the original 14 ft x 26 ft garage which you can walk into from the basement. P...

It goes to the air filter box, which has a diverter door that selects between the heated air, and air from the front of the car. I removed mine due to a non-functional door.

Is your flex joint bad on your exhaust manifold (#2)?

When I had my NA '96 GLT, that failed in me as well. I was able to find a new flex joint with a flange on it and welded it on as a replacement.

Is your flex joint bad on your exhaust manifold (#2)? When I had my NA '96 GLT, that failed in me as well. I was able to find a new flex joint with a flange on it and welded it on as a replacement. https://turbochuckcom.ipage.com/webimages/projects/96%20Volvo%20850/New_flex.jpg Good opportunity to ...