Login Register

Search found 620 matches

Return

by abscate
05 May 2019, 10:02
Jump to forum
Jump to topic

Re: 850 2.5L 20 V Rescue

Felicitations a vous!
by xanthefin
11 May 2019, 10:44
Jump to forum
Jump to topic

Volvo 850 '97 Project - One Collision [56K warning]

Thought share here too history of my estate and with lots of pics if someones likes or if someone can spots my errors and give advices. I wasn't sure where post this mix of project car/tips as wanted this too share what i came up with too as DIY tutorials. I saw there is some loose that in here sect...
by Sommerfeldt
12 May 2019, 16:08
Jump to forum
Jump to topic

Re: 850 2.5L 20 V Rescue

21 means the paint’s made by Beckers, and it’s solvent based or metallic. :)

4th digit is manufacturer, 5th is type of paint. :)

- S
by erikv11
12 May 2019, 18:06
Jump to forum
Jump to topic

Re: Ignition switch wiring

Yeah, the switch changed in mid 99 that must be the later one. Does this look more correct, from an 850? https://www.matthewsvolvosite.com/forums/download/file.php?id=14610 https://www.matthewsvolvosite.com/forums/download/file.php?id=14609 those are from https://www.matthewsvolvosite.com/forums/vie...
by wheelsup
25 May 2019, 20:34
Jump to forum
Jump to topic

When it's time to move on (and what did you buy?)

Our cars are getting older. I was a regular around here for years. I punched a bunch of tickets, with the evap repair and transmission swap being my biggest achievements. Also did the full timing belt replacement, including getting one of the bad batches of rollers that had the belt riding off the c...
by Sommerfeldt
01 Jun 2019, 07:29
Jump to forum
Jump to topic

Re: 850 2.5L 20 V Rescue

I'm not sure what you mean by the pressure hose being blocked - did you get the connector off? If not, I found one of the threads I was thinking about: viewtopic.php?t=60329
Take a look there before you pull more pieces off. ;)

- S
by ZionXIX
01 Jun 2019, 18:01
Jump to forum
Jump to topic

Re: Torx screws to remove door latch wont budge

I hammered my torx bit in for a good bite and then gently used a 3/8" breaker bar.