If following helps, this is emission code 2 diagram:

The evaporator pipe pn 30751987 (item #1) is apparently used in two styles, emission code 2, and code 4/5.

FWIW, here is a diagram of code 4/5:

Here is a progress pix for front passenger. The only way, I found, is to tilt and flip it over on to the back seat, and then maneuver it out of the rear door. MVS_Seat_0130.jpg MVS_Seat_0131.jpg MVS_Seat_0132.jpg MVS_Seat_0133.jpg MVS_Seat_0134.jpg MVS_Seat_0135.jpg MVS_Seat_0136.jpg MVS_Seat_0140.j...

Last fall, I had successfully serviced the 3.2 Engine Cooling with help from MVS mavericks, details here https://www.matthewsvolvosite.com/forums/viewtopic.php?f=10&t=87254 . Now VIDA too is working after a persistent support form RHP, and installing VIDA 2014D last winter. Thanks! The 2013A XC9...

Thank you Paul! I’m going to do the dump, measure, refill with same amount. From what I have read you can do this a few times to cycle the old fluid out. I don’t mind this approach. I don’t have the means to monitor the tranny temp to set the level with vehicle up to temp and running. My scangauge ...

10 years old is fine if it is running well. 300,000 miles service is coming. REED is a maintenance item.

Clean up and reinstalled VIDA/DiCE has worked.

See this http://vidadice.blogspot.com/2017/11/cl ... r-sql.html

cn90 often quotes Vince Lombardi - Winners never quit and quitters never win. Thanks to RHP, following procedure has always worked for me. HP Laptop, Centrino, 3GB, Windows 10 Pro, VIDA DiCE 2014D PERPARATIONS: a. Windows computer off b. DiCE NOT plugged at either ends (OBD2/USB) c. Key NOT in ignit...

If you haven't already with your 120K service, please tune up. Check cooling and charging systems.