Indeed:

Electronics controlled cars can get are picky about the voltages.

5. He mentions pulling the cable housing at the passenger (right) side strut tower in order to get to the cam bolt with a breaker bar. Is this others experience as well? This has to move? Yes, this is documented in VIDA. You might have a low profile tool that will fit, but the risk of breaking the ...

We're going to party like its...199999.......

That’s our house. I lost the Windows in a bet and still haven’t found enough on the street to re-window. Paints holding up well though.

How are diagnosing lack of spark?

Transient readings during cranking aren't meaningful....let's pull a spark plug coil, ground it, put a plug in it and look for spark.

Or, put a 3 second shot of ether into the air horn and see if it breathes fire

rspi wrote: ↑10 Feb 2018, 18:25

gmh wrote: ↑06 Feb 2018, 22:07

rspi wrote: ↑06 Feb 2018, 20:34 Was it made in a country that starts with a C and ends with an a?

Canada?
Colombia?
Croatia?
Cuba?

LOL China.

Costa Rica?

All of abscates...

Ill trust you, but need to verify a 1995 with VVIS - of course, you might want to check engine number to see if someone has put a 93-94 engine into your 95 Get her some nitrile gloves for working - you will both be happier without grunge under nails! You can get the nice purple ones for style ...and...

rspi wrote: ↑11 Feb 2018, 17:33 Dang, I don't even know what that is.

Thats not a post you see often.

If the Spinner is Scratching', then you aint got a chance of Matchin'

Replace that solenoid and gasket, then clear codes, see what comes back